Zum Inhalt

Produktdetails

Arca-Swiss

ARCA-SWISS C1 cube, monoball®Fix

€ 1 454.10 Auf Bestellung

Die Versandkosten richten sich nach Gewicht und Lieferadresse

Steht zum Ausprobieren für Sie bereit. Testen Sie es!

Shop

Dieses Produkt wurde Ihrem Warenkorb hinzugefügt.


Referenz : 560-8501005,1
Kategorie : Zubehör / Foto-Stative & -Halterungen / Kugelköpfe
Marke : Arca-Swiss

Eine Frage? Ein Angebot?
Unser Kundendienst antwortet Ihnen

Arca-Swiss C1 Cube with MonoballFix QR Overview

The Arca-Swiss C1 Cube is a three-axis panoramic head with an 88 lb load capacity, making it ideal for use with the heaviest cameras while maintaining a high degree of accuracy. The C1 Cube allows for finely-calibrated gearless panning adjustments with tension control. The two panoramic axes permit you to first center the Cube's controls to your position with the bottom axis, and then readjust the camera to point straight ahead with the upper axis. The gears' rubberized knobs give pinpoint control even when wearing gloves, and don't obstruct the head's movements. On the bottom there's a hinge allowing 62° tilt so that most cameras can reach the 90° vertical position. On top of the Cube there are two bubble levels and Arca-Swiss MonoballFix system quick release clamp. Although universal, the Cube's main use is in architectural and studio work, where precise movements and adjustments are required. Also suitable for macro photography, its design allows far fewer focusing readjustments while creating images. It essentially places the camera inside a sphere, as if the axes met at a point upon the image plane itself, with the camera rotating around a stationary image plane. This engineering feat was achieved to minimize movements to the optical system's entrance pupil during composing, making for speedier field work free of perpetual height and focus adjustments. The top of the Cube C1 has a geared panning platform with a range of 360° and a precision scale for precise and repeatable results

  • Compatible with Arca's MonoballFix quick release system
  • Sophisticated engineering, machined from a single billet
  • Designed in Switzerland, manufactured in France
  • Geared x-y axes with adjustable gear tension and 28° of motion
  • Third 62° tilt-only axis underneath geared adjustments
  • Rubberized knobs easily manipulated in the cold and with gloves
  • Movements allow camera's image plane to stay relatively stationary, easing macro work

 

 

An error has occurred. This app may no longer respond until reloaded. Reload 🗙