Produced from ultra fine 0.1 denier microfibers for optimum softness and density VisibleDust Magic Cleaner cloths are perfect for cleaning camera optics such as lenses and viewfinders. These cloths absorb dirt, grease and moisture more effectively than natural chamois leather, leaving a spot-free finish without abrasions.

It is recommended to use Magic Cleaner in conjunction with Lens Clean™ for a comprehensive optical surface cleaning.

These sensor cleaning swabs, with their unique fabric folding system, are specially tailored for cleaning your delicate sensor without leaving streaks, pooling or abrasions. The mini-channels, with contour, provide an even saturation of the swab’s paddles surface while preventing pooling and vertical flow at the edge. This reduces streaks associated with traditional flat surface swabs. The mini-channels also provide the extra reservoir to absorb the excessive liquid and prolonging the moisture life of the swab during the sensor cleaning process. Compatible with Sensor Clean, Smear Away, CMOS Clean or VDust Plus sensor cleaning liquids.

• 50x Green MXD-100 Vswabs® 24mm
• SwabLight™ – colors may vary

Sensor Clean™ has many characteristics that make it an excellent choice for cleaning your camera’s sensor. While Sensor Clean™ is best used on water based stains and light dust contamination, it also provides excellent dust repellent properties and anti-fogging capabilities.

It is recommended to use Sensor Clean with MXD-100 Green sensor cleaning swabs ONLY.

All of our solutions are safe on ITO and non ITO coated sensors.

VisibleDust liquid cleaners (Sensor Clean, VDust Plus and Smear Away) when used with VisibleDust Sensor Cleaning Vswabs are safe and effective on ALL digital SLR and mirrorless cameras.

Key features:

•     Removes water based stains and light dust contamination
•     Excellent dust repellent properties and anti-fogging capabilities
•     Nonflammable (can be shipped by airplane)

Arctic Beez™ is a pulsating device (patent pending) with frequency of 13000 rpm and a unique buzzing sound similar to that of bees. This vibration frequency is carried to the swab which is placed inside the device cavity. The Swabsonic™ Technology is powered by DC engine and smart electronic circuitry that generates soft sonic vibration to loosen dirt and stain on the coated sensor. It works 4X more efficiently than when the swab is used alone. One major cost associated with regular sensor cleaning is the number of swabs used per cleaning session in order to remove the stubborn stain. Arctic Beez™ helps to reduce the number of swabs used in sticky dirt situation leading to essential cost saving. This saving can accumulate over the years and seems to be significant enough to pay for a newer camera body.

Arctic Beez™ is equipped with one bright LED light illuminating the entire sensor and acting as a Swablight™. Arctic Beez™ supports a firm grip on the swab helping to achieve a better and more precise edge to edge sensor cleaning. Arctic Beez™ Smart Vibration Technology is designed to push the dirt in forward motion and not lateral and yet to be safe on DSLR coated sensors.

By using Swabsonic™ Technology one eliminates the guess work and fears associated with the amount of pressure needed to apply on the sensor. The Swabsonic™ Technology allows for smooth and effortless gliding of the swab in forward motion making the wet sensor cleaning quick and fun experience even for the first time user.

Arctic Beez™ is only recommended to be used with VisibleDust Vswab, DHAP Orange and/or UltraMXD-100 Green.

Arctic Beez™ essential features includes:

•     Swabsonic™ Technology powered by DC engine and smart circuitry.
•     Safe on coated sensor.
•     Equipped with Bright LED light.
•     4X more efficient verses sensor cleaning alone.
•     Strong grip for precise edge to edge sensor cleaning.
•     Packed in a classy case.

*Requires 2 AAA batteries (not included)
*Swabs are not included

Chamber Clean™ has been specifically developed to aid in the reduction of dust within the chamber area.It does not only clean away dust and oil that accumulate on the walls but also provides anti-static properties to reduce further build up. Chamber Clean™ is specifically formulated to have the following characteristics:

•     Antistatic — to prevent dust accumulation
•     Cleaning — helps remove stubborn flecks, dust and liner fabrics
•     Lubricant — to reduce flecks by reducing friction

Chamber Clean™ solution is filtered to less than 0.2 micron, 40 times smaller than 8 micron pixel size. Visible Dust does not recommend using other cleaning solutions which may contaminate the sensor. 

    Chamber Clean™ kit includes:

•     Chamber Clean™ liquid (8 ml)
•     Swabs for chamber cleaning (10 per kit)

The orange Visible Dust Sensor Brush Cleaning Kit contains everything you need to keep your sensor in good shapeVDust Plus Formula from Visible Dust, cleans the image sensor of DSLR Cameras from all kinds of contamination resulting in crystal clear images. If you are unsure as to the nature of your stain or you get both water and lubricant stains, VDust Plus will fit the bill. Designed to clean away water and most oil stains, VDust Plus eliminates streaking and provides a moderate static barrier. The very soft DHAP fabric of the swabs have traditionally been used for cleaning delicate surfaces such as telescopes and other scientific optics, and is ideal for critical cleaning. Due to its ultra softness, less pressure is applied to the sensor through the swabs while cleaning, thereby reducing the risk of squeezing or scraping debris on the sensor, and the thin structure provides better edge to edge cleaning maneuverability. The swabs work best with VDust Formula and good with Smear Away solutions, but are not compatible with the Sensor Clean Solution. Furthermore, the unique woven pattern of the DHAP fabric minimizes shedding of the swab while increasing absorbency. The patented mini-channel paddle, with contour, provides an even saturation of the paddles surface while preventing pooling and vertical flow at the edge. This reduces streaks associated with traditional flat surface paddles. The mini-channels also provide an extra reservoir to absorb any excessive liquid thereby prolonging the moisture life of the swab during the cleaning process. The Sensor Brush from Visible Dust is used for touch-ups and cleaning the edges around the sensor chamber. 

VisibleDust Zeeion filter refill

If you are unsure as to the nature of a stain on the sensor of your camera or you get both water and light lubricant stains, VDust Plus™ will fit the bill perfectly. Designed to clean away water and most oil stains, VDust Plus™ eliminates streaking and provides a moderate static barrier.

All of our solutions are safe on ITO and non ITO coated sensors.

VisibleDust liquid cleaners (Sensor Clean, VDust Plus and Smear Away) when used with VisibleDust Sensor Cleaning Vswabs are safe and effective on ALL digital SLR and mirrorless cameras.

• Removes stains of unknown origins, water and most oil stains.

Sensor Clean™ has many characteristics that make it an excellent choice for cleaning your camera’s sensor. While Sensor Clean™ is best used on water based stains and light dust contamination, it also provides excellent dust repellent properties and anti-fogging capabilities.

It is recommended to use Sensor Clean with MXD-100 Green sensor cleaning swabs ONLY.

All of our solutions are safe on ITO and non ITO coated sensors.

VisibleDust liquid cleaners (Sensor Clean, VDust Plus and Smear Away) when used with VisibleDust Sensor Cleaning Vswabs are safe and effective on ALL digital SLR and mirrorless cameras.

Key features:

•     Removes water based stains and light dust contamination
•     Excellent dust repellent properties and anti-fogging capabilities
•     Nonflammable (can be shipped by airplane)