The '72' is one of our latest camera bags - purpose built for those who want to carry just one small camera with a high degree of protection.

Within the interior of this compact bag, the padding that makes up the front, rear and side walls of its body is constructed from two overlapping layers of closed cell foam cut in different patterns – keeping all edges and corners fully protected. Further padding has been sewn into the bottom of the bag, and we have also included a removable padded base. Beneath the outer lid is a top flap, once again made of foam, protecting the camera on all six sides in the event of a knock or fall.

With an outer body constructed of either Billingham 3 layer canvas or FibreNyte, the Billingham 72 offers the ultimate in water resistance and provides full defence against inclement weather conditions. Both materials are hard-wearing yet lightweight and never require reproofing, remaining moisture and heat-resistant for their entire life. FibreNyte is an extra-rugged material that is more colour-fast and delivers even better protection against wear and tear.

The robust outer fabric, together with the contoured main flap that reaches over the sides of the bag, means your camera will be protected whatever the weather.

The bag’s Quick Release System comprises a strong leather tab and brass ClogBall, enabling fast opening with one hand to retrieve the camera, while securing the equipment in transit. Each model is reinforced with the finest top-grain leather, and all fittings are made from solid brass.

The shoulder sling is extra strong and made of shuttle-woven spun polyester. It can be adjusted for length or removed completely – making it ideal to carry as a shoulder bag itself, or as a storage case inside another bag whilst travelling, such as our Weekender bag. On the rear of the bag we have also included a wide belt loop for those who prefer to keep their camera a little closer.

A vertical padded divider attached with Velcro® is included with the Billingham 72, enabling the photographer to configure the bag and adjust it to fit their individual requirements. For cameras with slightly larger lenses attached, the divider can be re-positioned or removed to create more space.

A small pocket on the front provides storage for a spare battery, lens cap or memory cards.

As with all Billingham bags, the 72 is manufactured with extreme precision, meeting meticulous technical standards. Once it has passed Billingham’s strict quality controls, each bag is adorned with a laser-engraved woven label containing an individual 10-digit barcoded serial number as part of the company’s Unique Identifier (UI) system, allowing the bag to be registered, identified and tracked throughout its life.

With internal dimensions of 110mm (4⅜") x 90mm (3½") x 140mm (5½") (WxDxH), the Billingham 72 is the ideal size for premium fixed lens cameras such as the Leica Q (with lens hood), Leica Q2 (with lens hood), Fujifilm X100 range (with lens hood) or Sony DSC-RX1R series, and many small mirrorless system cameras with one small standard lens, such as the Fujifilm X-T2, Fujifilm XPro3, Olympus OMD E-M series, Leica M rangefinders or Canon EOS M kits. It is also ideal for many old 35mm (and even a few 120 film) cameras of a similar size.

The bag itself, with shoulder sling attached, weighs just 0.46kg (1.01 lbs).

The 72 is covered by our 5 year manufacturer’s guarantee and is made at our factory in England.

External Dimensions
W150mm (6") x D130mm (5⅛") x H190mm (7½")

Internal Dimensions (of Main Compartment)
W110mm (4⅜") x D90mm (3½") x H140mm (5½")

Capacity
1.38 litres (0.05 feet³)

Weight
0.33 kgs (0.73 lbs) (without sling) ---- 0.46 kgs (1.01 lbs) (with sling)

Pockets
1

The '72' is one of our latest camera bags - purpose built for those who want to carry just one small camera with a high degree of protection.

Within the interior of this compact bag, the padding that makes up the front, rear and side walls of its body is constructed from two overlapping layers of closed cell foam cut in different patterns – keeping all edges and corners fully protected. Further padding has been sewn into the bottom of the bag, and we have also included a removable padded base. Beneath the outer lid is a top flap, once again made of foam, protecting the camera on all six sides in the event of a knock or fall.

With an outer body constructed of either Billingham 3 layer canvas or FibreNyte, the Billingham 72 offers the ultimate in water resistance and provides full defence against inclement weather conditions. Both materials are hard-wearing yet lightweight and never require reproofing, remaining moisture and heat-resistant for their entire life. FibreNyte is an extra-rugged material that is more colour-fast and delivers even better protection against wear and tear.

The robust outer fabric, together with the contoured main flap that reaches over the sides of the bag, means your camera will be protected whatever the weather.

The bag’s Quick Release System comprises a strong leather tab and brass ClogBall, enabling fast opening with one hand to retrieve the camera, while securing the equipment in transit. Each model is reinforced with the finest top-grain leather, and all fittings are made from solid brass.

The shoulder sling is extra strong and made of shuttle-woven spun polyester. It can be adjusted for length or removed completely – making it ideal to carry as a shoulder bag itself, or as a storage case inside another bag whilst travelling, such as our Weekender bag. On the rear of the bag we have also included a wide belt loop for those who prefer to keep their camera a little closer.

A vertical padded divider attached with Velcro® is included with the Billingham 72, enabling the photographer to configure the bag and adjust it to fit their individual requirements. For cameras with slightly larger lenses attached, the divider can be re-positioned or removed to create more space.

A small pocket on the front provides storage for a spare battery, lens cap or memory cards.

As with all Billingham bags, the 72 is manufactured with extreme precision, meeting meticulous technical standards. Once it has passed Billingham’s strict quality controls, each bag is adorned with a laser-engraved woven label containing an individual 10-digit barcoded serial number as part of the company’s Unique Identifier (UI) system, allowing the bag to be registered, identified and tracked throughout its life.

With internal dimensions of 110mm (4⅜") x 90mm (3½") x 140mm (5½") (WxDxH), the Billingham 72 is the ideal size for premium fixed lens cameras such as the Leica Q (with lens hood), Leica Q2 (with lens hood), Fujifilm X100 range (with lens hood) or Sony DSC-RX1R series, and many small mirrorless system cameras with one small standard lens, such as the Fujifilm X-T2, Fujifilm XPro3, Olympus OMD E-M series, Leica M rangefinders or Canon EOS M kits. It is also ideal for many old 35mm (and even a few 120 film) cameras of a similar size.

The bag itself, with shoulder sling attached, weighs just 0.46kg (1.01 lbs).

The 72 is covered by our 5 year manufacturer’s guarantee and is made at our factory in England.

External Dimensions
W150mm (6") x D130mm (5⅛") x H190mm (7½")

Internal Dimensions (of Main Compartment)
W110mm (4⅜") x D90mm (3½") x H140mm (5½")

Capacity
1.38 litres (0.05 feet³)

Weight
0.33 kgs (0.73 lbs) (without sling) ---- 0.46 kgs (1.01 lbs) (with sling)

Pockets
1

The '72' is one of our latest camera bags - purpose built for those who want to carry just one small camera with a high degree of protection.

Within the interior of this compact bag, the padding that makes up the front, rear and side walls of its body is constructed from two overlapping layers of closed cell foam cut in different patterns – keeping all edges and corners fully protected. Further padding has been sewn into the bottom of the bag, and we have also included a removable padded base. Beneath the outer lid is a top flap, once again made of foam, protecting the camera on all six sides in the event of a knock or fall.

With an outer body constructed of either Billingham 3 layer canvas or FibreNyte, the Billingham 72 offers the ultimate in water resistance and provides full defence against inclement weather conditions. Both materials are hard-wearing yet lightweight and never require reproofing, remaining moisture and heat-resistant for their entire life. FibreNyte is an extra-rugged material that is more colour-fast and delivers even better protection against wear and tear.

The robust outer fabric, together with the contoured main flap that reaches over the sides of the bag, means your camera will be protected whatever the weather.

The bag’s Quick Release System comprises a strong leather tab and brass ClogBall, enabling fast opening with one hand to retrieve the camera, while securing the equipment in transit. Each model is reinforced with the finest top-grain leather, and all fittings are made from solid brass.

The shoulder sling is extra strong and made of shuttle-woven spun polyester. It can be adjusted for length or removed completely – making it ideal to carry as a shoulder bag itself, or as a storage case inside another bag whilst travelling, such as our Weekender bag. On the rear of the bag we have also included a wide belt loop for those who prefer to keep their camera a little closer.

A vertical padded divider attached with Velcro® is included with the Billingham 72, enabling the photographer to configure the bag and adjust it to fit their individual requirements. For cameras with slightly larger lenses attached, the divider can be re-positioned or removed to create more space.

A small pocket on the front provides storage for a spare battery, lens cap or memory cards.

As with all Billingham bags, the 72 is manufactured with extreme precision, meeting meticulous technical standards. Once it has passed Billingham’s strict quality controls, each bag is adorned with a laser-engraved woven label containing an individual 10-digit barcoded serial number as part of the company’s Unique Identifier (UI) system, allowing the bag to be registered, identified and tracked throughout its life.

With internal dimensions of 110mm (4⅜") x 90mm (3½") x 140mm (5½") (WxDxH), the Billingham 72 is the ideal size for premium fixed lens cameras such as the Leica Q (with lens hood), Leica Q2 (with lens hood), Fujifilm X100 range (with lens hood) or Sony DSC-RX1R series, and many small mirrorless system cameras with one small standard lens, such as the Fujifilm X-T2, Fujifilm XPro3, Olympus OMD E-M series, Leica M rangefinders or Canon EOS M kits. It is also ideal for many old 35mm (and even a few 120 film) cameras of a similar size.

The bag itself, with shoulder sling attached, weighs just 0.46kg (1.01 lbs).

The 72 is covered by our 5 year manufacturer’s guarantee and is made at our factory in England.

External Dimensions
W150mm (6") x D130mm (5⅛") x H190mm (7½")

Internal Dimensions (of Main Compartment)
W110mm (4⅜") x D90mm (3½") x H140mm (5½")

Capacity
1.38 litres (0.05 feet³)

Weight
0.33 kgs (0.73 lbs) (without sling) ---- 0.46 kgs (1.01 lbs) (with sling)

Pockets
1

We make removable 'End Pockets' for some of our bags to give you the option to store a little more or keep certain things separate from the contents of your main bag. Of course some people use these as small camera bags in their own right and that's ok with us!.

They are made of 3-layer waterproof canvas or 3- layer waterproof FibreNyte - just like our camera bags. They also feature fabric-lined closed cell foam padding on the bottom, sides, front and back to protect equipment inside from bumps (apart from the 550 end pockets which don't include padding).

Delta pockets feature a sewn-in belt loop on the back meaning they can be attached to a normal waist-belt securely.

External Dimensions: W125mm (5") x D65mm (2½") x H180mm (7")

Internal Dimensions: W110mm (4?") x D60mm (2?") x H150mm (6")

Capacity: 1.00 litres (0.03 feet³)

Weight: 0.2Kg (0.44lbs)

Rear Internal Pocket: W100mm (4") x D Nominal x H150mm (6")

The SP40 and SP50 are our new 'extra comfort' version that incorporates a grooved inner core of high density closed-cell foam designed to help the Shoulder Pad mould to the shape of your shoulder. They also have leather trim round the edge for a more attractive finish.

Dimensions
W65mm (2½") x D12mm (½") x L255mm (10")

('D' measurement excludes fixings on top)

Weight
0.07kg approx (0.15 lbs)

Fits shoulder slings that are 38mm wide (1½")

The Hadley Small Pro is the new sister bag to the ever-popular 'Hadley Small' - internally exactly the same size, but with some added features that should make it perfect for many professional photographers and demanding enthusiasts.

The first of these features is a carry handle on top. The handle we chose has a leather underneath for added comfort when carrying - especially useful if you want to use the bag as a mini briefcase for long periods after removing the adjustable shoulder sling (included).

The second addition is a document pocket on the back of the bag - this has a waterproof zip for extra protection in a downpour. Also on the back we added a luggage trolley strap – so that you can slide the bag over the handle on a trolley suitcase for easy travel through an airport.

Of course we made sure to keep the best parts of the original 'Hadley Small'. For impact protection the bag features the same well-tested padded liner insert (included) as the current ‘Hadley Small’ design. This is made from dense, fabric covered, ‘closed cell’ foam and provides impact protection on all six sides – including the lid. Inside the insert come two removable vertical dividers, and two removable padded flaps for stacking lenses – these dividers attach inside with Velcro®. The insert itself attaches into the bag with a single strong press-stud – remove the insert and the bag transforms from a camera bag to stylish compact messenger bag.

Like all our camera bags the outside is made with 3 layer stormproof 'Stormblock' material - two layers of fabric bonded together with a middle layer of butyl rubber. Stormblock fabric never needs 're-proofing' because the butyl layer is bonded permanently into the core of the fabric. The top flap of the bag is ‘sculpted’ over the opening of the main compartment so that even driving rain shouldn’t get in if you have it closed up.

The front closing straps are designed around the ‘Quick Release System’. To open the bag you slide the leather straps off the brass ‘clogballs’ at the top of the strap – with a bit of practice you'll soon be able to open the bag one handed. The buckles half way down the closing straps are used solely to adjust the fit of the top flap over the main opening and the pockets - you don't need to use them to open the bag. We made these straps slightly less wide compared to the Hadley Pro (and old Hadley Small) to help the aesthetics of the bag. The bag's two front pockets are fitted with a secondary stud in their top outer corner - open this stud to create extra space or close it to form a handy pen holder.

The Hadley Small Pro is small on the outside yet larger than you’d expect on the inside. For example it can hold 2 rangefinder cameras (e.g. Leica M10 and M9 each with lenses attached), a premium mirrorless (CSC) camera (Fujifilm X-Pro2, Lumix GH5 or Olympus OM-D E-M1) with 2 or 3 small to medium sized lenses or even a mid-sized DSLR without battery grip (e.g. Canon 5D Mk4 with 24-70mm f2.8 attached and 24-105mm lens in the bag too) because the bag can bow out slightly at the top to accommodate larger equipment. If you need extra capacity you can add one or two AVEA 7 end pockets on the strong leather side panels.

Because of all this, and because the bag doesn’t look like a camera bag, the Hadley Small Pro is an ideal companion while travelling in the city or the country. Like all our camera bags the Hadley Small Pro is made in England and backed by our 5 year manufacturer's guarantee.

External Dimensions

W330mm (13") x D140mm (5½”) x H210mm (8¼”) (excluding top handle)

W330mm (13") x D140mm (5½”) x H250mm (10¼”) (including top handle)

Internal Dimensions (Main compartment)
W260mm (10¼”) x D80mm (3⅛”) x H190mm (7½”)

Please note this bag and its padded insert are flexible - especially front to back. It's one of the best things about the bag! Therefore it can fit items slightly larger than the dimensions suggest - inside it could comfortably bow out to a 'D' measurement of 100mm at the bottom and 120mm at the top (at the centre) for example, at a stretch it can go out to 140mm (5½").

Capacity
3.50 litres (0.12 feet³)

Weight
0.80 kgs (1.76 lbs) (excluding shoulder sling) OR 0.95 kgs (2.09lbs) (including shoulder sling)

Pockets:
3 in total (excluding main compartment)

Front Dump Pockets (x2)
Dimensions: W100 to 140mm (4” to 5½”) x D40 to 50mm (1½” to 2”) x H170mm (6¾”)
Capacity: 0.5 to 0.75 litres (0.02 feet³ to 0.03 feet³)

Rear zipped pocket: W245mm (9⅝") x D Nominal x H160mm (7⅞")
Capacity: Nominal

Shoulder Sling Measurements
Length: can be adjusted between 1000mm (39⅜") to 1700mm (67") approx.
Width: 38mm (1½").

The Hadley Small Pro is the new sister bag to the ever-popular 'Hadley Small' - internally exactly the same size, but with some added features that should make it perfect for many professional photographers and demanding enthusiasts.

The first of these features is a carry handle on top. The handle we chose has a leather underneath for added comfort when carrying - especially useful if you want to use the bag as a mini briefcase for long periods after removing the adjustable shoulder sling (included).

The second addition is a document pocket on the back of the bag - this has a waterproof zip for extra protection in a downpour. Also on the back we added a luggage trolley strap – so that you can slide the bag over the handle on a trolley suitcase for easy travel through an airport.

Of course we made sure to keep the best parts of the original 'Hadley Small'. For impact protection the bag features the same well-tested padded liner insert (included) as the current ‘Hadley Small’ design. This is made from dense, fabric covered, ‘closed cell’ foam and provides impact protection on all six sides – including the lid. Inside the insert come two removable vertical dividers, and two removable padded flaps for stacking lenses – these dividers attach inside with Velcro®. The insert itself attaches into the bag with a single strong press-stud – remove the insert and the bag transforms from a camera bag to stylish compact messenger bag.

Like all our camera bags the outside is made with 3 layer stormproof 'Stormblock' material - two layers of fabric bonded together with a middle layer of butyl rubber. Stormblock fabric never needs 're-proofing' because the butyl layer is bonded permanently into the core of the fabric. The top flap of the bag is ‘sculpted’ over the opening of the main compartment so that even driving rain shouldn’t get in if you have it closed up.

The front closing straps are designed around the ‘Quick Release System’. To open the bag you slide the leather straps off the brass ‘clogballs’ at the top of the strap – with a bit of practice you'll soon be able to open the bag one handed. The buckles half way down the closing straps are used solely to adjust the fit of the top flap over the main opening and the pockets - you don't need to use them to open the bag. We made these straps slightly less wide compared to the Hadley Pro (and old Hadley Small) to help the aesthetics of the bag. The bag's two front pockets are fitted with a secondary stud in their top outer corner - open this stud to create extra space or close it to form a handy pen holder.

The Hadley Small Pro is small on the outside yet larger than you’d expect on the inside. For example it can hold 2 rangefinder cameras (e.g. Leica M10 and M9 each with lenses attached), a premium mirrorless (CSC) camera (Fujifilm X-Pro2, Lumix GH5 or Olympus OM-D E-M1) with 2 or 3 small to medium sized lenses or even a mid-sized DSLR without battery grip (e.g. Canon 5D Mk4 with 24-70mm f2.8 attached and 24-105mm lens in the bag too) because the bag can bow out slightly at the top to accommodate larger equipment. If you need extra capacity you can add one or two AVEA 7 end pockets on the strong leather side panels.

Because of all this, and because the bag doesn’t look like a camera bag, the Hadley Small Pro is an ideal companion while travelling in the city or the country. Like all our camera bags the Hadley Small Pro is made in England and backed by our 5 year manufacturer's guarantee.

External Dimensions

W330mm (13") x D140mm (5½”) x H210mm (8¼”) (excluding top handle)

W330mm (13") x D140mm (5½”) x H250mm (10¼”) (including top handle)

Internal Dimensions (Main compartment)
W260mm (10¼”) x D80mm (3⅛”) x H190mm (7½”)

Please note this bag and its padded insert are flexible - especially front to back. It's one of the best things about the bag! Therefore it can fit items slightly larger than the dimensions suggest - inside it could comfortably bow out to a 'D' measurement of 100mm at the bottom and 120mm at the top (at the centre) for example, at a stretch it can go out to 140mm (5½").

Capacity
3.50 litres (0.12 feet³)

Weight
0.80 kgs (1.76 lbs) (excluding shoulder sling) OR 0.95 kgs (2.09lbs) (including shoulder sling)

Pockets:
3 in total (excluding main compartment)

Front Dump Pockets (x2)
Dimensions: W100 to 140mm (4” to 5½”) x D40 to 50mm (1½” to 2”) x H170mm (6¾”)
Capacity: 0.5 to 0.75 litres (0.02 feet³ to 0.03 feet³)

Rear zipped pocket: W245mm (9⅝") x D Nominal x H160mm (7⅞")
Capacity: Nominal

Shoulder Sling Measurements
Length: can be adjusted between 1000mm (39⅜") to 1700mm (67") approx.
Width: 38mm (1½").

The Hadley Small Pro is the new sister bag to the ever-popular 'Hadley Small' - internally exactly the same size, but with some added features that should make it perfect for many professional photographers and demanding enthusiasts.

The first of these features is a carry handle on top. The handle we chose has a leather underneath for added comfort when carrying - especially useful if you want to use the bag as a mini briefcase for long periods after removing the adjustable shoulder sling (included).

The second addition is a document pocket on the back of the bag - this has a waterproof zip for extra protection in a downpour. Also on the back we added a luggage trolley strap – so that you can slide the bag over the handle on a trolley suitcase for easy travel through an airport.

Of course we made sure to keep the best parts of the original 'Hadley Small'. For impact protection the bag features the same well-tested padded liner insert (included) as the current ‘Hadley Small’ design. This is made from dense, fabric covered, ‘closed cell’ foam and provides impact protection on all six sides – including the lid. Inside the insert come two removable vertical dividers, and two removable padded flaps for stacking lenses – these dividers attach inside with Velcro®. The insert itself attaches into the bag with a single strong press-stud – remove the insert and the bag transforms from a camera bag to stylish compact messenger bag.

Like all our camera bags the outside is made with 3 layer stormproof 'Stormblock' material - two layers of fabric bonded together with a middle layer of butyl rubber. Stormblock fabric never needs 're-proofing' because the butyl layer is bonded permanently into the core of the fabric. The top flap of the bag is ‘sculpted’ over the opening of the main compartment so that even driving rain shouldn’t get in if you have it closed up.

The front closing straps are designed around the ‘Quick Release System’. To open the bag you slide the leather straps off the brass ‘clogballs’ at the top of the strap – with a bit of practice you'll soon be able to open the bag one handed. The buckles half way down the closing straps are used solely to adjust the fit of the top flap over the main opening and the pockets - you don't need to use them to open the bag. We made these straps slightly less wide compared to the Hadley Pro (and old Hadley Small) to help the aesthetics of the bag. The bag's two front pockets are fitted with a secondary stud in their top outer corner - open this stud to create extra space or close it to form a handy pen holder.

The Hadley Small Pro is small on the outside yet larger than you’d expect on the inside. For example it can hold 2 rangefinder cameras (e.g. Leica M10 and M9 each with lenses attached), a premium mirrorless (CSC) camera (Fujifilm X-Pro2, Lumix GH5 or Olympus OM-D E-M1) with 2 or 3 small to medium sized lenses or even a mid-sized DSLR without battery grip (e.g. Canon 5D Mk4 with 24-70mm f2.8 attached and 24-105mm lens in the bag too) because the bag can bow out slightly at the top to accommodate larger equipment. If you need extra capacity you can add one or two AVEA 7 end pockets on the strong leather side panels.

Because of all this, and because the bag doesn’t look like a camera bag, the Hadley Small Pro is an ideal companion while travelling in the city or the country. Like all our camera bags the Hadley Small Pro is made in England and backed by our 5 year manufacturer's guarantee.

External Dimensions

W330mm (13") x D140mm (5½”) x H210mm (8¼”) (excluding top handle)

W330mm (13") x D140mm (5½”) x H250mm (10¼”) (including top handle)

Internal Dimensions (Main compartment)
W260mm (10¼”) x D80mm (3⅛”) x H190mm (7½”)

Please note this bag and its padded insert are flexible - especially front to back. It's one of the best things about the bag! Therefore it can fit items slightly larger than the dimensions suggest - inside it could comfortably bow out to a 'D' measurement of 100mm at the bottom and 120mm at the top (at the centre) for example, at a stretch it can go out to 140mm (5½").

Capacity
3.50 litres (0.12 feet³)

Weight
0.80 kgs (1.76 lbs) (excluding shoulder sling) OR 0.95 kgs (2.09lbs) (including shoulder sling)

Pockets:
3 in total (excluding main compartment)

Front Dump Pockets (x2)
Dimensions: W100 to 140mm (4” to 5½”) x D40 to 50mm (1½” to 2”) x H170mm (6¾”)
Capacity: 0.5 to 0.75 litres (0.02 feet³ to 0.03 feet³)

Rear zipped pocket: W245mm (9⅝") x D Nominal x H160mm (7⅞")
Capacity: Nominal

Shoulder Sling Measurements
Length: can be adjusted between 1000mm (39⅜") to 1700mm (67") approx.
Width: 38mm (1½").

The Hadley Small Pro is the new sister bag to the ever-popular 'Hadley Small' - internally exactly the same size, but with some added features that should make it perfect for many professional photographers and demanding enthusiasts.

The first of these features is a carry handle on top. The handle we chose has a leather underneath for added comfort when carrying - especially useful if you want to use the bag as a mini briefcase for long periods after removing the adjustable shoulder sling (included).

The second addition is a document pocket on the back of the bag - this has a waterproof zip for extra protection in a downpour. Also on the back we added a luggage trolley strap – so that you can slide the bag over the handle on a trolley suitcase for easy travel through an airport.

Of course we made sure to keep the best parts of the original 'Hadley Small'. For impact protection the bag features the same well-tested padded liner insert (included) as the current ‘Hadley Small’ design. This is made from dense, fabric covered, ‘closed cell’ foam and provides impact protection on all six sides – including the lid. Inside the insert come two removable vertical dividers, and two removable padded flaps for stacking lenses – these dividers attach inside with Velcro®. The insert itself attaches into the bag with a single strong press-stud – remove the insert and the bag transforms from a camera bag to stylish compact messenger bag.

Like all our camera bags the outside is made with 3 layer stormproof 'Stormblock' material - two layers of fabric bonded together with a middle layer of butyl rubber. Stormblock fabric never needs 're-proofing' because the butyl layer is bonded permanently into the core of the fabric. The top flap of the bag is ‘sculpted’ over the opening of the main compartment so that even driving rain shouldn’t get in if you have it closed up.

The front closing straps are designed around the ‘Quick Release System’. To open the bag you slide the leather straps off the brass ‘clogballs’ at the top of the strap – with a bit of practice you'll soon be able to open the bag one handed. The buckles half way down the closing straps are used solely to adjust the fit of the top flap over the main opening and the pockets - you don't need to use them to open the bag. We made these straps slightly less wide compared to the Hadley Pro (and old Hadley Small) to help the aesthetics of the bag. The bag's two front pockets are fitted with a secondary stud in their top outer corner - open this stud to create extra space or close it to form a handy pen holder.

The Hadley Small Pro is small on the outside yet larger than you’d expect on the inside. For example it can hold 2 rangefinder cameras (e.g. Leica M10 and M9 each with lenses attached), a premium mirrorless (CSC) camera (Fujifilm X-Pro2, Lumix GH5 or Olympus OM-D E-M1) with 2 or 3 small to medium sized lenses or even a mid-sized DSLR without battery grip (e.g. Canon 5D Mk4 with 24-70mm f2.8 attached and 24-105mm lens in the bag too) because the bag can bow out slightly at the top to accommodate larger equipment. If you need extra capacity you can add one or two AVEA 7 end pockets on the strong leather side panels.

Because of all this, and because the bag doesn’t look like a camera bag, the Hadley Small Pro is an ideal companion while travelling in the city or the country. Like all our camera bags the Hadley Small Pro is made in England and backed by our 5 year manufacturer's guarantee.

External Dimensions

W330mm (13") x D140mm (5½”) x H210mm (8¼”) (excluding top handle)

W330mm (13") x D140mm (5½”) x H250mm (10¼”) (including top handle)

Internal Dimensions (Main compartment)
W260mm (10¼”) x D80mm (3⅛”) x H190mm (7½”)

Please note this bag and its padded insert are flexible - especially front to back. It's one of the best things about the bag! Therefore it can fit items slightly larger than the dimensions suggest - inside it could comfortably bow out to a 'D' measurement of 100mm at the bottom and 120mm at the top (at the centre) for example, at a stretch it can go out to 140mm (5½").

Capacity
3.50 litres (0.12 feet³)

Weight
0.80 kgs (1.76 lbs) (excluding shoulder sling) OR 0.95 kgs (2.09lbs) (including shoulder sling)

Pockets:
3 in total (excluding main compartment)

Front Dump Pockets (x2)
Dimensions: W100 to 140mm (4” to 5½”) x D40 to 50mm (1½” to 2”) x H170mm (6¾”)
Capacity: 0.5 to 0.75 litres (0.02 feet³ to 0.03 feet³)

Rear zipped pocket: W245mm (9⅝") x D Nominal x H160mm (7⅞")
Capacity: Nominal

Shoulder Sling Measurements
Length: can be adjusted between 1000mm (39⅜") to 1700mm (67") approx.
Width: 38mm (1½").

Keep your Compact Flash (CF) cards safe, secure, and all in one place.

Sized for today’s high capacity cards, these compact card wallets provide convenient access and organization.

KEY FEATURES:
 

•     Card-Again CF holds 4 CF or XQD Cards
•     Lightweight materials
•     Attachment point to tether to a bag or clothing
•     Slim design fits easily in your pocket

Exterior Dimensions:
4.3” W x 2.5” H x 0.5” D (11 x 6.3 x 1.3 cm)
Weight:
1.0 oz. (28 g)