Compatible avec :

- Leica Ultravid HD-Plus 8x32
- Leica Ultravid 10x32
- Leica Ultravid 8x42
- Leica Trinovid HD 8x32
- Leica Trinovid HD 10x32
- Leica Trinovid HD 8x42
- Leica Trinovid HD 10x42

The 'Galbin 8' and 'Galbin 10' binocular cases are precision-engineered to offer the greatest level of protection for valuable optics equipment when travelling, out in the field or in transit.

One the most notable aspects of the bag is the effort we've gone to to keep the weather out of it. Each case is made Billingham's waterproof 3-layer canvas or 3-layer FibreNyte materials that never require reproofing and remain moisture-resistant for the whole lifetime of the bag. Our canvas is hardwearing and our FibreNyte an even harder wearing material that is colour-fast and delivers exceptional durability and protection against wear and tear.

In addition to this waterproof material the bag features a contoured outer main flap, as well as an internal soft cover with drawstring cord fastener and secure toggle lock, affording additional defence against both dust and inclement weather conditions.

The bags incorporate the Billingham’s Quick Release System - a strong leather strap with a solid brass ‘clogball’ fastener positioned on the front of the bag to allow the owner to gain access to equipment, quickly and quietly, the instant it is needed. This flexible mechanism avoids the risk of disturbing the subjects being observed, and allows rapid access to the bag - with a little practice you should be able to open and close it one-handed.

On the side of the bag are two solid brass D-rings - these can be used to quickly attach and detach the removable shoulder sling (included), also with the QRS system. The shoulder sling is adjustable for length and is made from high strength shuttle-woven polyester.

On the reverse of the bag are two sturdy leather reinforced straps that are secured by press studs, these enable secure attachment to a waist-belt (up to 6cm wide) for optimum portability.

We have integrated a handy slip pocket into the design at the back of the main compartment, for the storage of rainguards, objective lens covers, notebooks, accessories or mobile phones.

In addition to its high quality canvas the bag features top-grain leather and solid brass fixings. It is made at our own factory in Cradley Heath, England. The bag is protected by Billingham's 5 year manufacturer's guarantee.

External Dimensions (with shoulder sling attached): 230 x 200 x 80mm (WxHxD)

External Dimensions (without shoulder sling attached): 210 x 200 x 80mm (WxHxD)

Internal Dimensions:

Width: front 110mm/back 170mm

Height: front 130mm/back 160mm

Depth: 70mm

Internal Dimensions of back pocket: 150 x 140mm (WxH)

Weight:
0.35kgs (with shoulder sling)
0.23kgs (without shoulder sling)

Capacity: 1.3 litres

Compatible avec :

- Leica Ultravid HD-Plus 8x32
- Leica Ultravid 10x32
- Leica Ultravid 8x42
- Leica Trinovid HD 8x32
- Leica Trinovid HD 10x32
- Leica Trinovid HD 8x42
- Leica Trinovid HD 10x42

The 'Galbin 8' and 'Galbin 10' binocular cases are precision-engineered to offer the greatest level of protection for valuable optics equipment when travelling, out in the field or in transit.

One the most notable aspects of the bag is the effort we've gone to to keep the weather out of it. Each case is made Billingham's waterproof 3-layer canvas or 3-layer FibreNyte materials that never require reproofing and remain moisture-resistant for the whole lifetime of the bag. Our canvas is hardwearing and our FibreNyte an even harder wearing material that is colour-fast and delivers exceptional durability and protection against wear and tear.

In addition to this waterproof material the bag features a contoured outer main flap, as well as an internal soft cover with drawstring cord fastener and secure toggle lock, affording additional defence against both dust and inclement weather conditions.

The bags incorporate the Billingham’s Quick Release System - a strong leather strap with a solid brass ‘clogball’ fastener positioned on the front of the bag to allow the owner to gain access to equipment, quickly and quietly, the instant it is needed. This flexible mechanism avoids the risk of disturbing the subjects being observed, and allows rapid access to the bag - with a little practice you should be able to open and close it one-handed.

On the side of the bag are two solid brass D-rings - these can be used to quickly attach and detach the removable shoulder sling (included), also with the QRS system. The shoulder sling is adjustable for length and is made from high strength shuttle-woven polyester.

On the reverse of the bag are two sturdy leather reinforced straps that are secured by press studs, these enable secure attachment to a waist-belt (up to 6cm wide) for optimum portability.

We have integrated a handy slip pocket into the design at the back of the main compartment, for the storage of rainguards, objective lens covers, notebooks, accessories or mobile phones.

In addition to its high quality canvas the bag features top-grain leather and solid brass fixings. It is made at our own factory in Cradley Heath, England. The bag is protected by Billingham's 5 year manufacturer's guarantee.

External Dimensions (with shoulder sling attached): 230 x 200 x 80mm (WxHxD)

External Dimensions (without shoulder sling attached): 210 x 200 x 80mm (WxHxD)

Internal Dimensions:

Width: front 110mm/back 170mm

Height: front 130mm/back 160mm

Depth: 70mm

Internal Dimensions of back pocket: 150 x 140mm (WxH)

Weight:
0.35kgs (with shoulder sling)
0.23kgs (without shoulder sling)

Capacity: 1.3 litres

Compatible avec :

- Leica Noctivid 8x42
- Leica Noctivid 10x42
- Leica Geovid 10x42 HD-R
-Leica Duovid 10+15x50 (fits either way but the best fit is upside down)

The 'Galbin 8' and 'Galbin 10' binocular cases are precision-engineered to offer the greatest level of protection for valuable optics equipment when travelling, out in the field or in transit.

One the most notable aspects of the bag is the effort we've gone to to keep the weather out of it. Each case is made Billingham's waterproof 3-layer canvas or 3-layer FibreNyte materials that never require reproofing and remain moisture-resistant for the whole lifetime of the bag. Our canvas is hardwearing and our FibreNyte an even harder wearing material that is colour-fast and delivers exceptional durability and protection against wear and tear.

In addition to this waterproof material the bag features a contoured outer main flap, as well as an internal soft cover with drawstring cord fastener and secure toggle lock, affording additional defence against both dust and inclement weather conditions.

The bags incorporate the Billingham’s Quick Release System - a strong leather strap with a solid brass ‘clogball’ fastener positioned on the front of the bag to allow the owner to gain access to equipment, quickly and quietly, the instant it is needed. This flexible mechanism avoids the risk of disturbing the subjects being observed, and allows rapid access to the bag - with a little practice you should be able to open and close it one-handed.

On the side of the bag are two solid brass D-rings - these can be used to quickly attach and detach the removable shoulder sling (included), also with the QRS system. The shoulder sling is adjustable for length and is made from high strength shuttle-woven polyester.

On the reverse of the bag are two sturdy leather reinforced straps that are secured by press studs, these enable secure attachment to a waist-belt (up to 6cm wide) for optimum portability.

We have integrated a handy slip pocket into the design at the back of the main compartment, for the storage of rainguards, objective lens covers, notebooks, accessories or mobile phones.

In addition to its high quality canvas the bag features top-grain leather and solid brass fixings. It is made at our own factory in Cradley Heath, England. The bag is protected by Billingham's 5 year manufacturer's guarantee.

External Dimensions (with shoulder sling attached): 230 x 230 x 100mm (WxHxD)

External Dimensions (without shoulder sling attached): 210 x 230 x 100mm (WxHxD)

Internal Dimensions:
Width: front 110mm/back 170mm
Height: front 160mm/back 200mm
Depth: 80mm

Internal Dimensions of back pocket: 150 x 170mm (WxH)

Weight:
0.37kgs (with shoulder sling)
0.25kgs (without shoulder sling)

Capacity:
1.9 litres

Compatible avec :

- Leica Noctivid 8x42
- Leica Noctivid 10x42
- Leica Geovid 10x42 HD-R
-Leica Duovid 10+15x50 (fits either way but the best fit is upside down)

The 'Galbin 8' and 'Galbin 10' binocular cases are precision-engineered to offer the greatest level of protection for valuable optics equipment when travelling, out in the field or in transit.

One the most notable aspects of the bag is the effort we've gone to to keep the weather out of it. Each case is made Billingham's waterproof 3-layer canvas or 3-layer FibreNyte materials that never require reproofing and remain moisture-resistant for the whole lifetime of the bag. Our canvas is hardwearing and our FibreNyte an even harder wearing material that is colour-fast and delivers exceptional durability and protection against wear and tear.

In addition to this waterproof material the bag features a contoured outer main flap, as well as an internal soft cover with drawstring cord fastener and secure toggle lock, affording additional defence against both dust and inclement weather conditions.

The bags incorporate the Billingham’s Quick Release System - a strong leather strap with a solid brass ‘clogball’ fastener positioned on the front of the bag to allow the owner to gain access to equipment, quickly and quietly, the instant it is needed. This flexible mechanism avoids the risk of disturbing the subjects being observed, and allows rapid access to the bag - with a little practice you should be able to open and close it one-handed.

On the side of the bag are two solid brass D-rings - these can be used to quickly attach and detach the removable shoulder sling (included), also with the QRS system. The shoulder sling is adjustable for length and is made from high strength shuttle-woven polyester.

On the reverse of the bag are two sturdy leather reinforced straps that are secured by press studs, these enable secure attachment to a waist-belt (up to 6cm wide) for optimum portability.

We have integrated a handy slip pocket into the design at the back of the main compartment, for the storage of rainguards, objective lens covers, notebooks, accessories or mobile phones.

In addition to its high quality canvas the bag features top-grain leather and solid brass fixings. It is made at our own factory in Cradley Heath, England. The bag is protected by Billingham's 5 year manufacturer's guarantee.

External Dimensions (with shoulder sling attached): 230 x 230 x 100mm (WxHxD)

External Dimensions (without shoulder sling attached): 210 x 230 x 100mm (WxHxD)

Internal Dimensions:
Width: front 110mm/back 170mm
Height: front 160mm/back 200mm
Depth: 80mm

Internal Dimensions of back pocket: 150 x 170mm (WxH)

Weight:
0.37kgs (with shoulder sling)
0.25kgs (without shoulder sling)

Capacity:
1.9 litres

The '72' is one of our latest camera bags - purpose built for those who want to carry just one small camera with a high degree of protection.

Within the interior of this compact bag, the padding that makes up the front, rear and side walls of its body is constructed from two overlapping layers of closed cell foam cut in different patterns – keeping all edges and corners fully protected. Further padding has been sewn into the bottom of the bag, and we have also included a removable padded base. Beneath the outer lid is a top flap, once again made of foam, protecting the camera on all six sides in the event of a knock or fall.

With an outer body constructed of either Billingham 3 layer canvas or FibreNyte, the Billingham 72 offers the ultimate in water resistance and provides full defence against inclement weather conditions. Both materials are hard-wearing yet lightweight and never require reproofing, remaining moisture and heat-resistant for their entire life. FibreNyte is an extra-rugged material that is more colour-fast and delivers even better protection against wear and tear.

The robust outer fabric, together with the contoured main flap that reaches over the sides of the bag, means your camera will be protected whatever the weather.

The bag’s Quick Release System comprises a strong leather tab and brass ClogBall, enabling fast opening with one hand to retrieve the camera, while securing the equipment in transit. Each model is reinforced with the finest top-grain leather, and all fittings are made from solid brass.

The shoulder sling is extra strong and made of shuttle-woven spun polyester. It can be adjusted for length or removed completely – making it ideal to carry as a shoulder bag itself, or as a storage case inside another bag whilst travelling, such as our Weekender bag. On the rear of the bag we have also included a wide belt loop for those who prefer to keep their camera a little closer.

A vertical padded divider attached with Velcro® is included with the Billingham 72, enabling the photographer to configure the bag and adjust it to fit their individual requirements. For cameras with slightly larger lenses attached, the divider can be re-positioned or removed to create more space.

A small pocket on the front provides storage for a spare battery, lens cap or memory cards.

As with all Billingham bags, the 72 is manufactured with extreme precision, meeting meticulous technical standards. Once it has passed Billingham’s strict quality controls, each bag is adorned with a laser-engraved woven label containing an individual 10-digit barcoded serial number as part of the company’s Unique Identifier (UI) system, allowing the bag to be registered, identified and tracked throughout its life.

With internal dimensions of 110mm (4⅜") x 90mm (3½") x 140mm (5½") (WxDxH), the Billingham 72 is the ideal size for premium fixed lens cameras such as the Leica Q (with lens hood), Leica Q2 (with lens hood), Fujifilm X100 range (with lens hood) or Sony DSC-RX1R series, and many small mirrorless system cameras with one small standard lens, such as the Fujifilm X-T2, Fujifilm XPro3, Olympus OMD E-M series, Leica M rangefinders or Canon EOS M kits. It is also ideal for many old 35mm (and even a few 120 film) cameras of a similar size.

The bag itself, with shoulder sling attached, weighs just 0.46kg (1.01 lbs).

The 72 is covered by our 5 year manufacturer’s guarantee and is made at our factory in England.

External Dimensions
W150mm (6") x D130mm (5⅛") x H190mm (7½")

Internal Dimensions (of Main Compartment)
W110mm (4⅜") x D90mm (3½") x H140mm (5½")

Capacity
1.38 litres (0.05 feet³)

Weight
0.33 kgs (0.73 lbs) (without sling) ---- 0.46 kgs (1.01 lbs) (with sling)

Pockets
1